|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HMC194MS8 / 194MS8E v05.0105 GaAs MMIC SPDT SWITCH DC - 3 GHz Typical Applications The HMC194MS8 /HMC194MS8E is ideal for: * Cellular/PCS Base Stations * Portable Wireless * MMDS & WirelessLAN Features Ultra Small Package: MSOP8 High Isolation: 50 dB Positive Control: 0/+3V to 0/+7V 8 SWITCHES - SMT Functional Diagram General Description The HMC194MS8 & HMC194MS8E are low-cost SPDT switches in 8-lead MSOP packages for use in applications which require high isolation between two RF paths. The devices can control signals from DC to 3 GHz and have been optimized to provide extremely high isolation with minimal insertion loss in medium and low power applications. On chip circuitry allows positive voltage control operation at very low DC currents with control inputs compatible with CMOS and most TTL logic families. RF1 and RF2 are reflective opens when "OFF". Electrical Specifications, TA = +25 C, Vctl = 0/+5 Vdc, 50 Ohm System Parameter Insertion Loss RF1 / RF2 RF1 / RF2 Frequency DC - 2.0 GHz DC - 2.5 GHz DC - 3.0 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 3.0 GHz DC - 2.0 GHz DC - 2.5 GHz 0.5 - 3.0 GHz 0/+5V Control 0.5 - 3.0 GHz DC - 3.0 GHz tRISE, tFALL (10/90% RF) tON , tOFF (50% CTL to 10/90% RF) 10 24 ns ns 24 49 48 / 50 40 / 42 31 24 Min. Typ. 0.7 0.8 0.8 52 / 54 44 / 46 35 28 24 22 28 53 Max. 0.9 1.0 1.1 Units dB dB dB dB dB dB dB dB dB dBm dBm Isolation Return Loss Input Power for 1 dB Compression 0/+5V Control Input Third Order Intercept (Two-tone Input Power = +7 dBm Each Tone) Switching Characteristics 8 - 18 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC194MS8 / 194MS8E v05.0105 GaAs MMIC SPDT SWITCH DC - 3 GHz Insertion Loss 0 -0.5 INSERTION LOSS (dB) -1 -1.5 -2 -2.5 -3 0 1 2 3 FREQUENCY (GHz) Isolation 0 -10 ISOLATION (dB) -20 -30 -40 -50 -60 -70 0 1 2 3 FREQUENCY (GHz) RF1 RF2 8 SWITCHES - SMT 8 - 19 Return Loss 0 Input 0.1 and 1.0 dB Compression vs. Control Voltage INPUT POWER FOR 0.1dB & 1dB COMPRESSION 32 28 24 20 16 12 8 4 0 3 5 Control Input (Vdc) 7 P0.1dB at 900 MHz P1dB at 900 MHz P0.1dB at 1900 MHz P1dB at 1900 MHz P0.1dB at 3000 MHz P1dB at 3000 MHz RETURN LOSS (dB) -10 S11 S22 -20 -30 -40 0 1 2 3 FREQUENCY (GHz) Input Third Order Intercept Point vs. Control Voltage INPUT THIRD ORDER INTERCEPT (dBm) 60 50 40 30 20 10 0 3 5 Control Input (Vdc) 7 Truth Table *Control Input Voltage Tolerances are 0.2 Vdc. Control Input* A (Vdc) 0 +3 B (Vdc) +3 0 +5 0 +7 0 Control Current Ia (uA) -0.05 +0.05 -2 +2 -15 +15 Ib (uA) +0.05 -0.05 +2 -2 +15 -15 Signal Path State RF to RF1 ON OFF ON OFF ON OFF RF to RF2 OFF ON OFF ON OFF ON 900 MHz 1900 MHz 3000 MHz 0 +5 0 +7 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC194MS8 / 194MS8E v05.0105 GaAs MMIC SPDT SWITCH DC - 3 GHz Absolute Maximum Ratings RF Input Power (Vctl= 0V/+5V) Control Voltage Range (A & B) Hot Switch Power Level (Vctl= 0V/+5V) Channel Temperature Continuous Pdiss (T= 85 C) (derate 5.5 mW/C above 85 C) Thermal Resistance Storage Temperature Operating Temperature +27 dBm -0.2 to +7.5 Vdc +24 dBm 150 C 360 mW 180 C/W -65 to +150 C -40 to +85 C Class 1C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 8 SWITCHES - SMT ESD Sensitivity (HBM) Note: DC blocking capacitors are required at ports RFC, RF1 and RF2. Their value will determine the lowest transmission frequency. Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 6. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1. Package Information Part Number HMC194MS8 HMC194MS8E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H194 XXXX H194 XXXX [2] [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX 8 - 20 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC194MS8 / 194MS8E v05.0105 GaAs MMIC SPDT SWITCH DC - 3 GHz Typical Application Circuit 8 SWITCHES - SMT Notes: 1. Set logic gate and switch Vdd = +3V to +5V and use HCT series logic to provide a TTL driver interface. 2. Control inputs A/B can be driven directly with CMOS logic (HC) with Vdd of 3 to 7 Volts applied to the CMOS logic gates. 3. DC Blocking capacitors are required for each RF port as shown. Capacitor value determines lowest frequency of operation. 4. Highest RF signal power capability is achieved with Control set to 0/+7V. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 21 HMC194MS8 / 194MS8E v05.0105 GaAs MMIC SPDT SWITCH DC - 3 GHz Evaluation Circuit Board 8 SWITCHES - SMT List of Materials for Evaluation PCB 105143 [1] Item J1 - J3 J4 - J6 C1 - C3 R1, R2 U1 PCB [2] Description PC Mount SMA RF Connector DC Pin 100 pF capacitor, 0402 Pkg. 100 resistor, 0402 Pkg. HMC194MS8 / HMC194MS8E SPDT Switch 107821 Evaluation PCB The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 8 - 22 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC194MS8 / 194MS8E v05.0105 GaAs MMIC SPDT SWITCH DC - 3 GHz Notes 8 SWITCHES - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 23 |
Price & Availability of HMC194MS806 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |